West Seattle Chimney Pros logo

Gas Fireplace Service cost · West Seattle, WA

How much does gas fireplace service cost in West Seattle, WA?

$189–$475

What we charge for gas fireplace service.

Elsewhere in West Seattle it typically runs $150–$299. Market rates observed in West Seattle (King County, WA), surveyed October 4, 2026 — not our quote.

We charge $189–$475 for gas fireplace service in West Seattle. Annual service and tune-up; repairs quoted after diagnosis. The exact figure is set in writing after the $99 plus tax inspection, credited toward an approved quote, and you approve it before any work starts.

Gas Fireplace Service in Washington — gas fireplace service and tune-up
  • $189–$475 — what we charge for gas fireplace service
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Written quote before any work starts — you approve the price

What the price includes

What you get for the price

  • Annual service and tune-up; repairs quoted after diagnosis
  • A $99 plus tax on-site inspection first, credited toward an approved quote
  • A written, itemized quote with photos — you approve the price before any work starts

How it compares to the rest

What we charge for each service. Gas Fireplace Service is highlighted.

What we charge for chimney services in West Seattle, WA
ServiceWhat we chargeTypical West Seattle priceWhen you need it
Chimney Sweep$189–$449$70–$871Annual maintenance, or you burn regularly and it has been a year
Chimney Inspection$99 plus tax$99.95–$803Buying or selling a house, after a chimney fire, or before a new appliance
Chimney ReliningFrom $1,900$1,200–$2,500Cracked clay liner, an unlined chimney, or fitting a stove or insert
Chimney RepairFrom $425$123–$3,000Cracked bricks, open mortar joints, a leaning or spalling stack
Chimney Cap Installation$235–$850$199.95–$500Missing or rusted cap, rain or animals getting into the flue
Masonry Repair (Crown / Repointing)From $475$150–$3,000Cracked or crumbling crown, failing mortar joints across the stack
Chimney Waterproofing$320–$795$200–$500White staining on the brick, or damp showing inside
Chimney Flashing Repair$375–$1,500$300–$800Water stains on the ceiling around the chimney
Gas Fireplace Service$189–$475$150–$299Annual service, or the unit will not light or stay lit
Creosote RemovalFrom $245$300–$600Several seasons since the last sweep, or a hard glaze in the flue
Dryer Vent Cleaning$105–$295$89–$422Clothes need two cycles, or it has been over a year
Air Duct CleaningFrom $535no West Seattle data publishedAfter a renovation, or after water damage

Market rates observed in West Seattle (King County, WA), surveyed October 4, 2026 — not our quote. Sources: AAA Fireplace — Gas Fireplace Tune-Up, Emerald City Chimney — Prices, HomeBlue — Chimney Sweep Cost in Seattle, Washington, Homeyou — Chimney Cleaning in Seattle, WA costs, Homeyou — Chimney Repair in Seattle, WA costs, Homeyou — Chimney Sweeping in Seattle, WA costs, Homeyou — Seattle Dryer Vent Cleaning costs, Jason L. Chimney Co. — 2026 Pricing Guide, Mad Hatter Chimney Sweep — Chimney Cap Installation, Mad Hatter Chimney Sweep — Chimney Liner Installation, Mad Hatter Chimney Sweep — Chimney Repair, Mad Hatter Chimney Sweep — Chimney Waterproofing, Mad Hatter Chimney Sweep — Seattle Cost Guide, StarDucts — Typical Seattle Dryer Vent Cleaning Cost, Washington Energy Services — Gas Insert Tune-Up.

Published by others — not our quote

What gas fireplace service costs elsewhere in Seattle

Figures published by other companies and cost guides, local first, national for context. Not our quote.

  • $150–$275 per visit

    Seattle · Not our quote

    Gas fireplace service: burner cleaning, vent check and pilot inspection.

  • $299 per visit

    Seattle · Not our quote

    Flat-rate annual tune-up from a King County company whose service area includes Seattle: cleaning the burner and the glass, testing the thermocouple and thermopile, gas valve and venting checks. Undated page.

  • $259 per visit

    Seattle · Not our quote

    13-point tune-up at $259 for Archgard, Heat & Glo and company-installed gas fireplaces in the Puget Sound region; condos and multi-family homes not served. Undated page.

What moves the price

Every figure below is published by a third party. Not our quote.

Flat rate, and for which units
Two regional companies that count Seattle in their service area publish a flat tune-up price. AAA Fireplace charges $299. Washington Energy Services charges $259 for a 13-point tune-up, limited to Archgard, Heat & Glo and fireplaces it installed itself, and condos and multi-family buildings are outside what it serves.
What the visit includes
Mad Hatter's $150–$275 buys three things: the burner cleaned, the vent checked and the pilot inspected. For context, the American Community Survey finds that 32.8 percent of Seattle's occupied homes heat mainly with utility gas; that table records the primary fuel only, so it does not say how many houses have a gas fireplace.

A typical job, at our prices

How the bill adds up

A job at the bottom of our listed price for gas fireplace service — yours is set in writing after the inspection.

Typical gas fireplace service job, priced on our own grid
StepCost
On-site inspectionPaid at the visit, credited toward the quote once you approve it$99
The gas fireplace service itselfBalance due after the inspection credit$90

The total came to $189 before sales tax — our listed starting price for gas fireplace service, with the inspection counted inside it, not on top.

Washington rules that apply

  • The SDCI mechanical permit takes in new heating and venting equipment; gas lines are excluded, and those need a separate permit. Simple jobs can be issued as a subject-to-field-inspection (STFI) mechanical permit within 24 hours, most others take about nine weeks, and a permit is valid for 18 months. SDCI's furnace FAQ says any furnace replacement or alteration needs a permit and that homeowners may apply for furnace or mechanical STFI permits themselves. None of the SDCI pages opened names wood stoves or fireplace inserts explicitly.

Gas fireplace service cost — questions

What do other companies charge for gas fireplace service?

Published figures, not our quote: Mad Hatter Chimney Sweep — Seattle Cost Guide: $150–$275 per visit (Seattle, accessed 2026-10-04); AAA Fireplace — Gas Fireplace Tune-Up: $299 per visit (Seattle, accessed 2026-10-04); Washington Energy Services — Gas Insert Tune-Up: $259 per visit (Seattle, accessed 2026-10-04). Not our quote — what we charge is shown at the top of this page.

Does a Seattle mechanical permit include the gas line?

The SDCI mechanical permit takes in new heating and venting equipment; gas lines are excluded, and those need a separate permit. Simple jobs can be issued as a subject-to-field-inspection (STFI) mechanical permit within 24 hours, most others take about nine weeks, and a permit is valid for 18 months. SDCI's furnace FAQ says any furnace replacement or alteration needs a permit and that homeowners may apply for furnace or mechanical STFI permits themselves. None of the SDCI pages opened names wood stoves or fireplace inserts explicitly.

Common questions

Questions about gas fireplace service?

The exact price for your chimney is set on site, in writing, after the $99 plus tax inspection. Our FAQ covers booking, the inspection and where we work.

All our chimney pricesMore chimney questions, answered

Get in touch

Book an inspection

Ready for a clear, written gas fireplace service quote?

Book your inspection — $99 plus tax on-site inspection, credited toward an approved quote.

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Gas Fireplace Service in Alki

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Call (206) 589-5029Book