West Seattle Chimney Pros logo

West Seattle, WA

Gas Fireplace Service in West Seattle, WA

Gas fireplace service in West Seattle is the yearly cleaning and safety check of gas fireplaces, inserts and log sets, plus repairs when a unit won't light.

Our price

$189–$475

  • $189–$475 — what we charge for gas fireplace service
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Written quote before any work starts — photos of every job
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Gas Fireplace Service in Alki

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing — we'll point you to the right fix.

What we do

Our services

Sweeping, inspection, relining and masonry — one local crew for the whole chimney.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

What gas fireplace service actually involves

Gas is the second most common way Seattle heats its homes: Census estimates for 2020 to 2024 give utility gas 32.8% of occupied homes citywide, behind electricity at 61.1%, and about 41.9% in the ZIP code area that includes Gatewood, Fauntleroy and the south Seaview shore. A gas fireplace or insert draws on that same supply and asks for less attention than a wood fire, though not none. Burner ports clog, pilot assemblies and sensors foul, glass clouds, gaskets flatten and vents get blocked. Our service opens the unit far enough to clean and test each of those, then checks the vent and takes a carbon monoxide reading.

Burn bans are one reason households here choose gas. The Puget Sound Clean Air Agency words its Stage 1 and Stage 2 bans around wood-fired fireplaces, stoves and inserts, plus pellet stoves; a gas fireplace appears on neither list. Converting a wood fireplace to gas is a larger job than a service call. New heating and venting equipment falls under SDCI's mechanical permit, gas piping under a separate one, and we ask SDCI which applies before a conversion is scheduled.

What's included

  • Burner, pilot assembly and firebox cleaned; logs or media put back in the layout the manual shows
  • Thermocouple, thermopile or flame sensor tested
  • Glass removed and cleaned with fireplace glass cleaner, and its gasket checked
  • Vent path and termination examined for blockage
  • A leak check at the gas connections and carbon monoxide measured while the fire is on

Why it matters

Gas fireplaces earn their keep on this peninsula when the power fails. The windstorm of December 2006 cut power to 49 percent of Seattle City Light's customers; 95 percent were back inside two days, but complete restoration needed a week, by the city's windstorm analysis. The city's power-outage history also names West Seattle among the places a 1958 windstorm left dark. Many gas fireplaces with a standing pilot or a battery backup will light without mains power. Whether yours does depends on the model, and a service visit is the time to find out and to try it.

The city's analysis records the other side of those outages: several people in King County died in 2006 heating their homes with charcoal. Carbon monoxide is the hazard with any burning appliance, gas included. A failed glass gasket, a cracked firebox panel or a blocked vent can put combustion products into the room. The 2021 Seattle Mechanical Code also keeps unvented gas log heaters out of any factory-built fireplace whose listing does not cover them, so we confirm that a log set and the firebox it sits in belong together. Keep a working carbon monoxide alarm near any gas fireplace.

How it works

What to expect with gas fireplace service

  1. 1

    Identify the unit

    Direct-vent, B-vent or a log set in a masonry fireplace, plus make and model, since service follows the manual.

  2. 2

    Shut down and open up

    Gas off, glass off, logs out and photographed so they go back exactly as they were.

  3. 3

    Clean and test

    Ports, pilot and sensors are cleaned, and the sensor output is measured.

  4. 4

    Reassemble and fire

    Ignition, flame pattern and shutdown are all checked.

  5. 5

    Report

    Any part that is wearing out is named, with a quote if you want it replaced.

  • Licensed& insured Washington chimney contractor

  • 10 neighborhoodsFrom Alki and Admiral south to Arbor Heights

  • $99 plus taxInspection, credited toward an approved quote

  • Every jobDocumented with before-and-after photos

Signs you may need gas fireplace service

If any of these sound familiar, book the $99 plus tax inspection — credited toward the work if you approve the quote:

  • A pilot light that drops out, or takes repeated attempts to catch
  • Soot on the logs or the glass
  • A white film on the glass that ordinary wiping does not remove
  • A gas smell at any time: get everyone outside, then phone the gas utility
  • No service since the unit was installed

By town

Gas Fireplace Service in your town

The 10 West Seattle communities we serve. Pick yours for local scheduling and the chimney issues we see there.

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

A West Seattle Chimney Pros technician pointing toward the four steps of a visit

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Before you let anyone in

What you can verify about us

Every fact below is one you can check yourself before we ever set foot on your roof.

  • Licensed& insured Washington chimney contractor

  • 10 neighborhoodsFrom Alki and Admiral south to Arbor Heights

  • $99 plus taxInspection, credited toward an approved quote

  • Every jobDocumented with before-and-after photos

The West Seattle Chimney Pros service van parked in front of a West Seattle bungalow

Serving Alki, Admiral, the Junction & all of West Seattle

Gas Fireplace Service — common questions

How much is a gas fireplace service?

We charge $189–$475 for the service visit. Repairs are quoted separately, part by part, once the fault has been found.

Does a gas fireplace truly need servicing each year?

Most manufacturers ask for one in their manuals every twelve months, and NFPA 211's annual inspection, in the wording CSIA quotes, covers vents as well as chimneys.

Will my gas fireplace work in a power outage?

Many will. A unit with a standing pilot generates its own control voltage, and many electronic-ignition models carry a battery backup. Blower fans will not run. During service we can walk you through the procedure for your model.

Why is the glass cloudy?

Combustion leaves a mineral film on the inner face of the glass. Cleaned regularly with the proper cleaner the film comes away; ignored across several winters it may etch the surface permanently.

Do gas logs in a masonry fireplace still need the chimney looked at?

Yes. Gas logs make little soot when they burn correctly, but the flue may still hold creosote from its wood-burning past, and the damper has to stay open the way the log set's instructions require. Both are checked during the visit.

See gas fireplace service pricing in detailMore chimney questions

Get in touch

Book an inspection

Often booked alongside gas fireplace service

Gas Fireplace Service and related prices in West Seattle — published rates, 2026
ServicePrice in West SeattleWhat that covers
Gas Fireplace Service$189–$475Annual service and tune-up; repairs quoted after diagnosis
Chimney Sweep$189–$449Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance

Ranges are what these jobs are quoted at in West Seattle. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Ready to book your gas fireplace service?

Licensed local crews, a $99 on-site inspection credited toward repairs, and a written quote before any work. Book a real open slot on our calendar.

Call (206) 589-5029Book